Removing And Installing Roof Insulation/Reinforcement (Variant) - Volkswagen Golf Variant 2007 Workshop Manual

– Remove left and right roof grab handles -2-
– Lower moulded headliner slightly and disconnect wiring har‐
ness from moulded headliner, depending on equipment fitted
to vehicle.
– Fold front seat backrests completely to rear.
– Take out moulded headliner through opened rear lid.
6.5.2 Installing
– Install in reverse order of removal.
6.6 Removing and installing roof insulation/
reinforcement (Variant)
6.6.1 Removing
– Remove moulded headlining
– Cut roof insulation/reinforcement -1- into approx. 6 cm wide
strips -2- lengthwise using a carpet knife.
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
General body repairs, interior - Edition 12.2009
⇒ page 81
⇒ page 245 .
.
247
6. Roof trims