Volkswagen Golf Variant 2007 Workshop Manual page 31

– Remove lining mats -1- from rear cup holder or from storage
compartment.
– Remove two bolts each -2- and -3- (1.5 Nm).
– Remove two bolts each -4- and -5- (1.5 Nm).
– Remove lining mat from rear cup holder and remove bolt -6-
(1.5 Nm).
Note
When installing, bolts must be installed in sequence -2-, -3-, -4-, -5- and -6-.
– Pull centre console upwards as far as possible.
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
General body repairs, interior - Edition 12.2009
2. Compartments, covers and trims
23