– Remove front seat backrest
– Remove cover from front seat cushion (front seat padding is
not removed)
⇒ page 291
Caution
Do not disconnect connector on seat occupied recognition
control unit -J706- .
– Unclip pressure hose -6- from retainers.
– Unclip pressure sensor for seat occupied recognition -G452-
-5- from retainer, when doing this do not disconnect connec‐
tors -3- or -4- on pressure sensor for seat occupied recognition
-G452- or on seat occupied recognition control unit -J706-
-2-.
– Remove bolts -1- (1.5 Nm).
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
⇒ page 268
.
.
General body repairs, interior - Edition 12.2009
5. Seat occupied recognition (USA)
161