System Board Jumpers - Compaq Deskpro 2000 Series Reference Manual

appendix E
S B
YSTEM OARD
This section provides information for setting jumpers for
enabling/disabling passwords and clearing configuration
memory.
When you change a security feature, you will need to reset a
jumper and reconfigure the computer to recognize this change.
If the system configuration is incorrect, your computer may not
work properly and you may receive error messages on the
screen. Setting the system board jumpers are part of the
reconfiguration process, along with running the Computer Setup
utility.
To change the system board jumpers, you must remove the
computer cover. For procedures on removing the computer
cover, refer to Chapter 5, "Upgrading Your Desktop Computer,"
or Chapter 6, "Upgrading Your Minitower Computer."
WARNING:
To reduce the risk of personal injury from hot
!
surfaces, allow the internal system components to cool before
touching.
CAUTION:
Be sure to turn off the computer before changing a
jumper setting or damage to the system board can result.
J
UMPERS
Reference Guide
-1
E