Compaq Presario 8000 Setup Manual

Speaker Setup

for Creative
Sound Blaster
Live! and Sound
Blaster Audigy
Cards
Your PC comes set up to produce
sound through two speakers and,
depending on the speakers you
have, a subwoofer too.
If you have a 4 or 6 (5.1 channel)
speaker system, follow these steps
to get proper sound from all
speakers.
Connect all speakers to the correct
audio connectors on the subwoofer
and the PC.
Refer to the manufacturer's
documentation included with your
speakers.
Important:
Speaker setup cannot be
changed from the Control Panel.
You must select speaker setup in
Creative before you select it in
InterVideo WinDVD.
Speaker Setup in
Sound Blaster Live! or
Sound Blaster Audigy
1 Click Start on the taskbar.
2 Choose All Programs,
Creative, Sound Blaster
Live! or Sound Blaster
Audigy, and then click
Creative AudioHQ.
3 Double-click the Speaker icon.
4 Select either 4 Speakers
or 5.1 Speakers from the
Speakers drop-down menu. For
digital speakers, place a check
mark in the Digital Output Only
check box
.
5 Close the Surround Mixer and
AudioHQ windows.