R - Return Oil Line - New Holland T6010 Operator's Manual

SECTION 3 - - FIELD OPERATION
To connect the load sensing line from the implement
in Figures 140 and 141, a 'T' piece will need to be
inserted in to the hydraulic line. Consult your
authorised dealer.
IMPORTANT: To ensure correct operation of the
system, the implement control valve, when in
neutral, must be capable of directing the pressure
from the sensing line back to sump through the return
line (3) to the tractor. The hydraulic system will then
return to the low pressure standby mode.
R - - Return Oil Line (3)
The return oil line from the implement control valves
should be connected to the M27 x 2/19 (ISO 6149)
port (3). This will permit the oil to return directly back
into the tractor hydraulic system.
NOTE: Ensure the hoses have a suitable capacity to
accomodate the required oil flow, and that both the
sensing line and hoses are sufficiently long enough
to allow for implement movement or articulation
when in work.
3--82