Auto Pto Function With Mechanical Draft Control - New Holland T6010 Operator's Manual

To activate the Auto function, engage the P.T.O. as
previously described and then depress and hold the
AUTO side of the switch (1), for more than one
second. The Auto P.T.O. lamp on the instrument
panel will illuminate to confirm activation.
With the 3 point hitch in the lowered position and the
P.T.O. engaged, the Auto lamp will remain on.
Raising the implement will disconnect P.T.O. drive
and cause the Auto lamp to flash. Lowering the
implement will re--engage P.T.O. drive, the Auto lamp
will cease to flash and will remain on.
Depressing the Auto P.T.O. switch again will
de--activate the function and the Auto lamp will
extinguish.
NOTE: The Auto P.T.O. function will be de- -activated
every time the key start is switched off.
With Mechanical Draft Control
The P.T.O. will be disengaged one second after the
fast raise switch (1) is moved rearwards to the raise
position. P.T.O. drive will re--engage one second
after the hitch lowering switch (2) is fully depressed
to lower the 3--point hitch.
3--28
SECTION 3 - - FIELD OPERATION
40
41