Rocker Switch Bulbs - New Holland T6010 Operator's Manual

Rocker Switch Bulbs

Certain of the rocker switches are internally
illuminated, the bulb being removeable from the rear
of the switch assembly.
The switch assembly is retained by a sprung tag (3)
at either end. Use a small screwdriver to pry one end
of the rocker switch from the sheet metal and
withdraw the switch assembly.
To change a bulb, press in the tag (2) using a small
screwdriver and pull the bulb retainer (1) from the
back of the assembly. The bulbs are of the capless
type, rated at 1.2w and are a push fit in the retainer.
After changing the bulb, push the retainer into the
back of the switch assembly until the tag locates in
the aperture. Re-install the switch assembly.
SECTION 4 - - LUBRICATION AND MAINTENANCE
1
2
3
128
4--61