Top Link - New Holland T6010 Operator's Manual

Top Link

The top link has a threaded centre section (3) , which,
when rotated, will shorten or lengthen the top link, as
required. Lift up the spring retainer (1) to allow the
centre section (3) to rotate. To ease adjustment, lift
the handle (2) and use it as a lever. Alternatively,
rotating the link end (4) will permit limited adjustment
of top link length.
To lock the sleeve after adjustment, push the spring
retainer down so that it holds the handle flush against
the sleeve.
When not in use, the top link can be removed and
stored or left in an upright position. Hook the ball end
of the handle (2), into the bracket (1) on the rear axle
housing, as shown.
SECTION 3 - - FIELD OPERATION
146
147
3--87