Front Power Take-Off Data (4Wd Tractors Only); Steering Specifications; Maximum Operating Angle - New Holland T6010 Operator's Manual

FRONT POWER TAKE- -OFF
(4WD tractors only)
Type - - Single speed, fully independent
-- Shaft
-- Operation
-- Direction of rotation
Engine speed @ PTO speed
-- with 1000 rpm shaft
STEERING
Type
Turns from lock to lock
-- 2WD
-- 4WD
-- 4WD with Fast Steer activated
Front wheel alignment
2 wheel drive
Front wheel alignment
4 wheel drive

MAXIMUM OPERATING ANGLE

Front end up
Rear end up
Right--side up
Left--side up
8--12
SECTION 8 - - SPECIFICATIONS
T6010
Hydrostatic with tilt/telescoping steering wheel
3.35
3.9
10° right or left from the straight ahead position
mm 0 -- 13
in. 0 -- 0.5
+
mm 0 / -- 3
+
in. 0 / --0.12
T6020 T6030
6 Spline 39.4mm (1.375 in.)
Elecro--hydraulic
Anti--clockwise
All models, 2120 e.r.p.m.
3.35 3.35
3.9 3.9
0 -- 13 0 -- 13
0 -- 0.5 0 -- 0.5
+ +
0 / -- 3 0 / -- 3
+ +
0 / --0.12 0 / --0.12
All models, 35°
All models, 35°
All models, 30°
All models, 30°
T6050 T6070
3.35 3.35
3.9 3.9
0 -- 13 0 -- 13
0 -- 0.5 0 -- 0.5
+ +
0 / -- 3 0 / -- 3
+ +
0 / --0.12 0 / --0.12