Deluxe Air Suspension Seat - New Holland T6010 Operator's Manual

SECTION 2 - - CONTROLS, INSTRUMENTS AND OPERATION

Deluxe Air Suspension Seat

(where fitted)
The deluxe air suspension seat has electrically
controlled suspension. To make the initial
suspension adjustment, sit in the seat and hold the
lever (2) down until the seat has fully lowered.
Further seat suspension and ride height adjustments
are made with the key-start switch turned on. Sit in
the seat and lift and release the lever (2). A servo will
raise the seat, automatically adjust to your weight
and stop when the optimum suspension setting is
reached. To make further height adjustments, hold
51
the lever up or down, as required, to raise or lower the
seat. When the lever is released, the seat will stop at
the height selected.
This setting will be maintained every time the
key-start switch is turned on or until such time as the
setting is re-adjusted.
The backrest may be tilted to suit the operator. Lift
the lever (1) on the left-hand side of the seat frame
and adjust the inclination of the backrest. The
backrest will lock in position when the lever is
released.
There are five damping settings for the suspension.
Bounce up and down in the seat while swivelling the
knob (3) from fully rearward (hard) to fully forward
(soft). Correct adjustment of the suspension, ride
height and damping, will provide the optimum in ride
comfort.
The seat is permitted a limited, spring controlled
fore/aft movement (float) when the travel isolator
knob (4) is swivelled to point rearward. Swivelling the
knob to point forward will lock the isolator movement.
To facilitate observation of an implement attached to
the rear of the tractor, the seat may be rotated to the
left or right. Lift the lever (5) and rotate the seat as
desired. From the straight ahead position there are
two positions to the right and one to the left. Release
the catch to lock the seat.
2--29