Attaching Pto Drive Equipment - New Holland T6010 Operator's Manual

With shiftable P.T.O., a range lever is provided. The
lever is used to select one of two or three P.T.O.
speed ranges to provide power or economy. The
range lever (1), is located at the rear of the right-hand
console.
Ground drive P.T.O. is available, in conjunction with
3--speed, shiftable P.T.O., on all models. As
suggested by the name, ground drive P.T.O. speed
is directly related to rotation of the rear wheels rather
than engine speed. When ground drive P.T.O. is
installed, a second lever (2) is provided.
Three ground speed ranges are provided, selected
by means of the P.T.O. range lever (1). The lever (2)
is used to select ground drive.
ATTACHING P.T.O. DRIVEN EQUIPMENT
CAUTION
Before attaching or detaching equipment or
changing the P.T.O. shaft:
Firmly apply the parking brake.
•
Ensure that all gearshift levers are in neutral.
•
Disengage the P.T.O. (knob fully down) and wait
•
until the P.T.O. and equipment stops. Switch off
the engine before getting off the tractor.
With the engine stopped, the P.T.O. brake is released
and the shaft may be turned by hand to aid
implement shaft alignment.
Mount or hitch the equipment to the tractor as
outlined in THREE--POINT LINKAGE on page 3--83.
The P.T.O. guard serves as a support for drive-line
shields used with P.T.O.-driven equipment and
provides for your safety. Do not modify the guard. A
plastic P.T.O. cap (1) is also supplied and should
always be installed over the shaft when the P.T.O. is
not in use.
SECTION 3 - - FIELD OPERATION
15
16
3--15