Operation Of Draft Control - New Holland T6010 Operator's Manual

DRAFT CONTROL OPERATION
To operate in Draft Control adjustment of several
controls is necessary to suit the implement and field
conditions.
The draft loading wheel (2), determines implement
depth by setting a required force on the draft sensing
pins Set the wheel to the mid-position (position 5)
prior to commencing work.
The position of the draft sensitivity knob (1),
determines the sensitivity of the system. Set the
knob to the mid-position before entering the field.
Drive the tractor into the field and lower the
implement into work by moving the Position Control
lever (3), forward. Use the Position Control lever to
set the maximum depth and so prevent 'diving' when
areas of light soil are encountered. Set the required
implement working depth by rotating the draft loading
wheel (4).
Rotate the thumbwheel (1) to move the adjustable
stop (2) against the Position Control lever so that the
selected setting may be quickly found.
3--52
SECTION 3 - - FIELD OPERATION
88
89
90