Cast Iron Weights; Rear Wheel Weights; Front Wheel Weights; Front End Wafer Weights - New Holland T6010 Operator's Manual

CAST IRON WEIGHTS

(where fitted)

Rear wheel weights

Up to three cast iron weights (1), may be added to
each rear wheel.
With flanged axle: 6 x 45 kg (6 x 99 lb.) permitting a
maximum of 270 kg (594 lb.) to be carried.
With bar axle: 6 x 65 kg (6 x 143 lb.) permitting a
maximum of 390 kg (860 lb.) to be carried.
IMPORTANT: It is not recommended to fit rear
wheel weights on tractors operating at speeds in
excess of 40 k/mh (25 MPH).

Front wheel weights

For two wheel drive front wheels, segmented, cast iron
wheel weights (1), are available as an accessory. The
set of four (two per wheel) provides a total front wheel
ballast weight of 78 kg (172 lb.).

Front end wafer weights

Front end wafer weights are available in sets as
described in the following text.
45 kg (99 lb.) wafer weights are available in sets of
6, 10 and 18 which, together with the support
carrier and tow hook, weigh:
6 weights, including carrier
and tow hook.
10 weights, including carrier
and tow hook.
18 weights, including carrier
and tow hook.
SECTION 3 - - FIELD OPERATION
360 kg. (793 lb.)
540 kg. (1190 lb.)
900 kg. (1984 lb.)
233
1
234
235
3--139