Connecting Remote Cylinders
WARNING
Before connecting or disconnecting hydraulic hoses
at the remote cylinders, stop the engine and relieve
the pressure in the circuit by moving the remote
control valve lever(s) or joystick fully forward to the
'float' position then back to neutral. Never work under
or allow anyone near raised equipment as it will drop
when relieving pressure in the system.
WARNING
Before disconnecting cylinders or equipment ensure
the equipment or implement is supported securely.
To connect a remote cylinder, lift the hinged cover(1),
until it locks in the raised position, insert the feed
and/or return hose through the slit in the secondary
dust cover, ensuring it is correctly seated in the
coupler. Ensure that there is sufficient slack in the
hose(s) to allow the tractor/implement to turn in
either direction.
IMPORTANT: Before connecting remote cylinder
hoses, stop the engine and thoroughly clean the
connections to prevent oil contamination.
3--64
SECTION 3 - - FIELD OPERATION
112