SECTION 3 - - FIELD OPERATION
NOTE: If tractor speed exceeds 10 K/mh (6.2 MPH)
with Fast Steer in operation, it will be disengaged and
the indicator light (2) will flash.
NOTE: Where the transmission oil temperature is
low and Fast Steer is to be used, it is recommended
to turn the steering wheel twice, from full lock to full
lock, before commencing Fast Steer operation.
Fast Steer will be disabled if a fault occurs. Should
the system become disabled, an audible warning will
sound and an error code will appear in the Dot Matrix
Display. If the fault is of a critical nature, the 'STOP'
warning lamp will also flash on the instrument panel,
13
consult your authorised dealer.
To re--activate Fast Steer, turn the isolator switch (1)
'OFF', correct the fault, and then turn the isolator
switch 'ON'.
IMPORTANT: To promote safe operation of Fast
Steer, it is advised that the operator become familiar
with the system before operating in the field.
3--13