New Holland T6010 Operator's Manual page 58

SECTION 2 - - CONTROLS, INSTRUMENTS AND OPERATION
Lift the travel adjustment lever (6) and move the seat
forward or backward, as required. The seat will lock
in position when the lever is released.
For optimum comfort, the seat cushion may be
adjusted for height and reach.
To move the seat cushion forwards or rearwards, pull
up the catch (8), grasp the cushion and move to the
desired position. Release the catch to lock.
To adjust the height, lift and hold the release catch (7)
and then pull up or push down on the front of the seat
cushion. Release the catch to lock. Cushion
adjustments are most easily achieved with the
operator out of the seat.
The adjusters (9) on the underside of the armrests
may be turned to alter the angle of the armrests. Turn
them clockwise to raise the front of the armrests, turn
anti-clockwise to lower. Both armrests may be raised
to the vertical position if required.
The seat has a built-in lumbar support actuated by
handwheel (10) and on the left-hand side of the
backrest. Turn the wheel clockwise to increase
lumbar support or anti-clockwise to decrease.
To adjust the height of the upper back support pad on
top of the backrest, grasp the pad and raise or lower
as desired. The pad has a number of positions in
which it will lock. Slowly move the pad until a faint
'click' is heard, the pad will now remain in this
position.
A storage pouch is provided on the back of the seat.
2--30
52
53