Entering And Exiting The Cab - New Holland T6010 Operator's Manual

SECTION 2 - - CONTROLS, INSTRUMENTS AND OPERATION

Entering and Exiting the Cab

Wherever possible, the cab should be entered from
the left side.
WARNING
Do not grasp the gear levers when entering the cab
from the right-hand side. Use only the grab handles
provided on the frame and door.
To enter the cab, face the door, then open it. Place
one foot on the lowest step plate and, using the grab
handles on the 'A' post and inside the door, climb the
steps and enter the cab.
Sit in the seat and, where fitted, pull the door closed
using the knob (1). Fasten the seat belt, if fitted.
To exit the cab, release the seat belt, open the door,
grasp the grab handles, back out of the cab and
descend the steps using the grab handles.
7
8
2--9