New Holland T6010 Operator's Manual page 113

New holland t6010; t6020; t6030; t6050; t6070 tractors
Hide thumbs Also See for T6010:
Table of Contents

Advertisement

SECTION 2 - - CONTROLS, INSTRUMENTS AND OPERATION
NOTE: With the tractor stationary and the shuttle
lever in forward or reverse drive, moving the main
shift lever from neutral without first depressing the
clutch pedal will result in the drive not being engaged.
Error code 'N' will appear in the transmission display
and an audible alarm will sound. Depress the clutch
pedal and shift the shuttle lever to neutral to clear the
display and re-engage the drive.
NOTE: To avoid power losses due to internal friction,
place both gearshift lever and the shuttle lever in
neutral when performing stationary operations.
The shift lever (1), incorporates two electrical push
buttons that are used to make instantaneous up or
down powershifts. Button (2) is depressed to make
upward changes, button (4) for downward changes.
It is not necessary to use the clutch pedal to make a
powershift.
For convenience, a duplicate set of shift buttons are
located on the right--hand control panel, see
Figure 126.
To make an upward change between gears 4 and 5
hold in the intermediate range change button (3) and
depress the upshift button (2),. The change will be
indicated in the gear display. Use the same
procedure to change from gear 12 to 13.
Downward changes are made using the same
procedure but depressing the downshift button (4).
If preferred, the clutch pedal may be used instead of
the intermediate range change button.
NOTE: Attempting to shift from one range to another
without using the range change button or clutch
pedal will cause the audible alarm to sound.
When the main shift lever is moved forward from
neutral or from any gear within the 1--8 range, 9th.
gear will always be selected.
Conversely, if the lever is moved rearward from
neutral or from the 9--16 range with the tractor
moving, the speed matching function will select the
most suitable gear between 5th and 8th. To select an
alternative gear, maintain pressure on the clutch
pedal and use the powershift buttons to engage a
different gear, then release the clutch pedal.
124
125
126
2--85

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

T6030T6070T6020T6050

Table of Contents