Headlight And Worklamp Adjustment; Roof Mounted With Standard Cab - New Holland T6010 Operator's Manual

OPERATION 43
HEADLIGHT AND WORKLAMP
ADJUSTMENT
Headlights
To avoid blinding on coming drivers, adjust the angle
of the headlight beams.
Each headlight is adjusted by rotating the two
adjusters (1) clockwise or anti--clockwise according
to the amount of correction required.
Worklamps
Dependant upon model and specification, adjustable
worklamps may be installed on the front and rear of
of the cab roof, low down at the front of the cab or on
the rear fenders. Non--adjustable worklamps are
mounted on the front of the hood , adjacent to the
headlights.

Roof Mounted with Standard Cab

Cab roof mounted worklamps are adjusted by
moving the protruding lever (1), backwards or
forwards.
Grab Rail Mounted with Low Profile Cab
To adjust the position of the light, grasp the lamp
assembly and rotate upwards or downwards .
SECTION 4 - - LUBRICATION AND MAINTENANCE
115
116
117
4--57