Power Take-Off (Pto) - Control Identification - New Holland Workmaster 50 Operator's Manual

Power Take-Off (PTO) - Control identification

WARNING
Entanglement hazard!
Do not wear loose clothing when operating
Power Take-Off (PTO) driven equipment.
Failure to comply could result in death or se-
rious injury.
The Power Take-Off (PTO) lever (1) is located on the left-
hand side of the operator's platform. The PTO lever (1) is
used to engage or disengage the power transmission to
the rear PTO shaft from engine.
A standard speed of 540 RPM PTO can be obtained at an
engine speed of 2575 RPM .
Shift the lever (1) forward to engage the PTO and rear-
ward to disengage the PTO.
Power Take-Off (PTO) Lever
A standard speed of 540 RPM PTO can be obtained at
an engine speed of 2575 RPM and 540E RPM can be ob-
tained at an engine speed of 2016 RPM.
Shift lever (1) to position (A) to get PTO 540 RPM and
shift the lever (1) to position (B) to get PTO 540E RPM .
3 - CONTROLS AND INSTRUMENTS
W0337A
3-17
DANGER
Entanglement hazard!
Make sure all people and obstructions are
clear of the implement before engaging the
tractor Power Take-Off (PTO).
Failure to comply will result in death or seri-
ous injury.
86090124N
GNIL14TR00553AA
D0077A
1
2