Setup] Menu ([Quality] Options) - Canon LBP7780CX User Manual

07YL-0U1

[Setup] Menu ([Quality] Options)

NOTE
Table description
Bold values in the table indicate the default settings.
The setting items or setting values with "*" may not be displayed depending on the availability of the optional
accessories and other settings.
About the icons
The settings for the printer driver are prioritized for this item.
:
The settings in the control panel are enabled for this item because the settings are prioritized for the
default settings for the printer driver.
:
Check the settings in the control panel even when using the printer driver.
Setting Item
[Gradation Level]
[Toner Save]
*
[Density: C]
*
[Density: M]
*
[Density: Y]
*
[Density: K]
[Density C (Fine
*
Adj)]
[Density M (Fine
*
Adj)]
[Density Y (Fine
Adj)]*
Setting Value
Specify the data gradation process when printing. It is effective to set
[High 1], [High 2] [High 1] when printing photographs at standard quality, and to set [High
2] when printing at a higher quality.
[Toner Save] is used for test printing. When you use [Toner Save], you
can save toner when you print.
[Off], [On]
-8 Light to 0 to +8
Dark
Adjust the print density of each color when printing. The larger the
-8 Light to 0 to +8
setting value, the greater the print density.
Dark
-8 Light to 0 to +8
Dark
-8 Light to 0 to +8
Dark
[High]: -8 Light to 0
to +8 Dark
[Mid]: -8 Light to 0
to +8 Dark
[Low]: -8 Light to 0
to +8 Dark
[High]: -8 Light to 0
to +8 Dark
[Mid]: -8 Light to 0
to +8 Dark
Adjust the print density of each color for density level. The larger the
[Low]: -8 Light to 0
setting value, the greater the print density.
to +8 Dark
[High]: -8 Light to 0
to +8 Dark
[Mid]: -8 Light to 0
to +8 Dark
[Low]: -8 Light to 0
to +8 Dark
When it is set to [On], the print density becomes lower, and
sometimes it does not print well.
When [Toner Save] is set to [On], this setting is unselectable.
When [Toner Save] is set to [On], this setting is unselectable.
Setting