Canceling Operations Currently in
Progress
(Soft Reset)
When you only want to cancel operations currently in progress follow the instructions below
to carry out a soft reset. When you carry out a soft reset, you only lose data received by the
active interface. Data received by non-active interfaces is not affected.
• Always cancel printing from the printer (soft reset) after you have canceled
the printing from the computer.
• All data that is printing when you carry out a soft reset will be lost. Print the
data again from your PC.
• If data that is in the memory is data from another interface, it will be printed
out when the printer goes on-line.
1
Press the オンライン key to turn off the オンライン indicator.
▼ Setting can be carries out using the operation panel.
オンライン
ユーティリティ
排 出
2
Hold down the リセット key until the message [ソフト リセット] appears
on the display.
This message will be displayed for approximately one second. If you hold down the key for more
than five seconds, a hard reset will be carried out.
オンライン
ユーティリティ
排 出
▼ The message [ソフト リセット] will disappear when resetting is completed.
3
Press the オンライン key to turn on the オンライン indicator.
▼ Printing is enabled.
オンライン
ユーティリティ
排 出
動作モード
セットアップ
リセット / 実行
動作モード
セットアップ
リセット / 実行
動作モード
セットアップ
リセット / 実行
00 インサツ カノウ A4
ハイシ トレイ
00 インサツ カノウ A4
ハイシ トレイ
00 ソフト リセット
00 インサツ カノウ A4
ハイシ トレイ
37