Optical Parts In The Microscope Main Body; Switching The Output Port - Nikon ECLIPSE Ti2-U Instruction Manual

3.2

Optical Parts in the Microscope Main Body

3.2.1

Switching the Output Port

The optical image output port can be switched by
setting the optical path changeover dial on the right
side of the microscope to the required index mark
(two protrusions) position.
 Operation:
Ti2-U
Optical path
Optical path and light amount
changeover dial
Eyepiece observation port 100%
Left side port 100%
L
Right side port 100%
R
A U X
Ti2-U (eyepiece:left port = 20:80)
Optical path
Optical path and light amount
changeover dial
Eyepiece observation port 100%
Left side port 100%
L
Right side port 100%
R
Eyepiece observation port 20%
+
L
Left side port 80%
There are protrusions (
two protrusions) also on the dials so that the
output port can be switched without looking at the
dial.
Specifications of the AUX port
The AUX port may be set as follows according to the specification at the time of purchase. There is no
output if not specified.
• R80 (Right side port 80%, Eyepiece observation port 20%)
Ti2-U output port
The following output ports are usable in this microscope.
Output port
Eyepiece observation port
Side port (right/left)
Tube base unit side port
(tube base unit with port)
Back port
(optional: TI-BPU)
－
: one protrusion, :
L
An optical output port for visually observing a microscope image through a
binocular part of a tube.
An optical output port for a microscope image on both sides of the microscope.
A microscopy camera, a confocal head, and a photometer sensor can be attached.
Use a selected adapter for attachment.
An optical output port for a microscope image on a side of the tube base.
A selected adapter can be used to attach the microscope camera. Turn the optical
path changeover dial to "
knob to " ."
When an FL turret is mounted on the microscope, attaching the TI-BPU back port
unit enables an optical image output. Set up FL turrets in a two-tier configuration
by using the stage up kit enables simultaneous multi-wavelength microscopy using
two cameras.
Switching the output port
Description
" and switch the tube base optical path changeover
31
Chapter 3 Usage of Components
Optical path
changeover
dial