Camera Adjustment (Adjusting The Brightness Of The Image On The Monitor); Optical Path Switching; Optical Path Distribution; Disabling The Clicking Of The Optical Path Switching Lever - Nikon Eclipse 50i Instructions Manual

Camera adjustment
3.2.7
(adjusting the brightness of the image on the monitor)
When observing images captured by the camera and displayed on the monitor, you can adjust
brightness by varying camera adjustment parameters, such as display mode, exposure mode,
metering mode, exposure compensation, and image level adjustment.
For detailed discussion, refer to the operating manual provided with the camera or camera
control software.

Optical Path Switching

3.3

Optical path distribution

3.3.1
With the ergonomic binocular tube or trinocular
eyepiece tube, the optical path switching lever
allows distribution of light to the binocular section
and camera port.
Ergonomic binocular
tube
Trinocular eyepiece
tube T
Trinocular eyepiece
tube F

Disabling the clicking of the optical path switching lever

3.3.2
The trinocular eyepiece tubes T and F have a "NO
CLICK" switch on their tube mounting surfaces.
Slide this switch in the direction of the arrow with
the tip of a pointed tool to disable clicking for the
optical path switching lever. Set the switch to this
position if you need to eliminate the slight
vibrations resulting from the clicking action.
Chapter 3 Individual Operations
3.3 Optical Path Switching
Position of optical path
switching lever
Pushed in
Extended
Pushed in
Extended by one notch
Extended by two notches
Pushed in
Extended
39
Optical path distribution (%)
Binocular section Camera port
100
50
100
20
0
100
0
NO CLICK
3
Optical path
switching lever
0
50
0
80
100
0
100