Modifying An Existing Format Using The Format Editor - Quantum Data 980 DP User Manual

980 DP Video Generator - User Guide

7.10 Modifying an existing format using the Format Editor

The procedure below describes how to make a few changes on an existing format using the Format Editor. This
enables you to quickly run tests a display by tweaking a few timing parameters at a time.
To modify an existing format with the Format Editor:
1. Access the Format Editor using the procedures described in
The Format Editor appears.
4. Click the Open activation button on the bottom of the panel (indicated above).
A dialog box enabling you to scroll and select a format appears as shown below.
Page 159
Accessing the Format Editor.
Rev. A4
July 14, 2014