Mitsubishi Apricot LS Series Owner's Handbook Manual page 97

Message
NVRAM Data Invalid,
NVRAM Cleared
Parallel Port Resource Conflict
PCI Error Log is Full
PCI I/O Port Conflict
PCI IRQ Conflict
PCI Memory Conflict
Primary Boot Device Not Found
Primary IDE Controller
Resource Conflict
Primary Input Device Not
Found
Secondary IDE Controller
Resource Conflict
Serial Port 1 Resource Conflict
Serial Port 2 Resource Conflict
Static Device Resource Conflict
System Device Resource Conflict
T r o u b l e s h o o t i n g
Explanation
Invalid entry in the ESCD.
The parallel port has requested a resource
that is already in use.
This message is displayed when more than
15 PCI conflict errors are detected. No
additional PCI errors can be logged.
Two devices requested the same resource,
resulting in a conflict.
Two devices requested the same resource,
resulting in a conflict.
Two devices requested the same resource,
resulting in a conflict.
The designated primary boot device (hard
disk drive, diskette drive, CD-ROM
drive, or network) could not be found.
The primary IDE controller has requested
a resource that is already in use.
The designated primary input device
(keyboard, mouse, or other, if input is
redirected) could not be found.
The secondary IDE controller has
requested a resource that is already in use.
Serial port 1 has requested a resource that
is already in use.
Serial port 2 has requested a resource that
is already in use.
A non Plug and Play ISA card has
requested a resource that is already in use.
A non Plug and Play ISA card has
requested a resource that is already in use.
LS700 HANDBOOK 6/7