Installing A Hard Drive In The Main Peripheral Carrier - Mitsubishi Apricot LS Series Owner's Handbook Manual

C h a s s i s a n d C o m p o n e n t s
Removing a narrow Device from the main Peripheral Carrier
2/20 LS700 HANDBOOK
8. Connect power and data cables to the device.
Figure 16. Installing a Hard Drive in the main
Peripheral Carrier
1. Observe the precautions in 'Before You Begin', at the
beginning of this chapter.
2. Remove the top cover.
3. Remove the access side cover.
4. Remove the bezel.
5. Remove the main peripheral carrier.
6. Remove the four screws that secure the device to the
carrier.
7. Replace the main peripheral carrier back into the
chassis.