Selecting A Site; Power Supply - Mitsubishi Apricot LS Series Owner's Handbook Manual

S y s t e m d e s c r i p t i o n a n d i n s t a l l a t i o n

Selecting a Site

Power Supply

Checking the Input Voltage Setting
1/4
LS700 HANDBOOK
Choose a site that is:
♦
Clean and as dust free as possible.
♦
Well ventilated and away from sources of heat includ-
ing direct sunlight.
♦
Well away from sources of water or damp.
♦
Stable and protected from sources of vibration or
physical shock.
♦
Isolated from strong electromagnetic fields produced by
electrical devices, such as large air-conditioning units.
♦
Equipped with a properly earthed power outlet within
easy reach.
♦
In regions that are susceptible to electrical storms, it
may also be advisable to plug your system into a surge
suppresser.
◊ Disconnect telecommunication lines to any modem
during an electrical storm.
A 200 watt (peak) power supply is integrated into the chassis
to provide power for the motherboard, add-in cards, and
peripheral devices. A switch on the back panel can be used to
set the power supply to operate at:
♦
115 V AC (in the range of 100 - 120 V AC), or
♦
230 V AC (in the range of 200 - 240 V AC)
To verify that your system has the correct setting for your
environment, check the input power selection switch. This
should already be correctly set for the country of sale.