Chassis Covers - Mitsubishi Apricot LS Series Owner's Handbook Manual

C h a s s i s a n d C o m p o n e n t s

Chassis Covers

Removing the Top Cover
2/2 LS700 HANDBOOK
WARNING
The power supply in this computer contains no user-serviceable
parts. To avoid personal injury or damage to your equipment,
refer repair or replacement of the power supply to qualified
technical personnel only.
1. Observe the precautions in 'Before You Begin', at the
beginning of this chapter.
2. If you are removing the cover for the first time, you
may need to remove the plastic plug in the padlock
hole (see Figure 4). Save it for re-installation.
◊ If you installed a padlock on the chassis, unlock the
padlock and remove it.
3. Grasp the top cover at the rear of the chassis.
4. Slide the cover towards the rear of the chassis until it
stops (just over 1cm).
5. Lift the cover away from the chassis.