Hard Drive - Mitsubishi Apricot LS Series Owner's Handbook Manual

B I O S a n d s e t u p
Feature
On Modem Ring
On LAN
On PME
QuickBoot Mode
Scan User Flash Area • Disabled (default)
First Boot Device
Second Boot Device
Third Boot Device
Fourth Boot Device
5/14 LS700 HANDBOOK
Options
• Stay Off
• Power On (default)
• Stay Off
• Power On (default)
• Stay Off
• Power On (default)
• Enabled
• Disabled (default)
• Enabled
• Removable devices

• Hard Drive

• ATAPI CD-ROM
Drive
• Network boot
Description
Specifies how the computer
responds to an incoming
call on an installed modem
when the power is off.
Specifies how the computer
responds to a LAN wakeup
event when the power is
off.
Specifies how the computer
responds to a PCI power
management enable event
when the power is off.
Enables the computer to
boot without running
certain POST tests.
Enables the BIOS to scan
the flash memory for user
binary files that are
executed at boot time.
Specifies the boot sequence
from the available devices.
To specify boot sequence:
1. Select the boot device
with <↑> or <↓>.
2. Press <+> to move the
device up the list or <-
> to move the device
down the list.
The operating system
assigns a drive letter to each
boot device in the order
listed. Changing the order
of the devices changes the
drive lettering.