Removing The Non-Access Side Cover - Mitsubishi Apricot LS Series Owner's Handbook Manual

C h a s s i s a n d C o m p o n e n t s
Installing the Non-Access Side Cover
Removing the Bezel
2/6 LS700 HANDBOOK
Figure 6. Removing the Non-Access Side Cover
1. Observe the precautions in "Before You Begin."
2. Holding the side cover at a slight angle, insert the tabs
at the front of the cover into their slots. Swing the
cover snugly against the chassis.
3. Press the top tab into its slot.
4. Press against the middle and bottom of the side cover
to properly seat the rest of the tabs.
1. Observe the precautions in 'Before You Begin', at the
beginning of this chapter.
2. Remove the top cover.
3. Remove the access side cover.