Removing The Bezel - Mitsubishi Apricot LS Series Owner's Handbook Manual

4. Release the fan/card guide module (see Figure 7) by
pressing the two tabs on the long edge of the module
and pulling until you can swing the module away from
the front of the chassis.
◊ You may have to remove some add-in cards to move
the module.
5. Release the two tabs holding the bezel to the chassis by
pressing them outward. (See Figure 7).
6. Lift the front of the chassis slightly, and pull the bezel
away.
7. Press the fan/card guide module back into place.
CAUTION
Do not use excessive force to remove plastic components as it
may cause damage to fixing tabs etc.
Figure 7. Removing the Bezel
C h a s s i s a n d C o m p o n e n t s
LS700 HANDBOOK 2/7