How To Install Memory - Mitsubishi Apricot LS Series Owner's Handbook Manual

U p g r a d i n g

How to Install Memory

4/6 LS700 HANDBOOK
Figure 28. Installing the Heatsink Support Top
Bar
A Heatsink support bar
B Retaining pins
Set the Processor Speed
After you install the processor and install the motherboard,
set the processor speed by using the Setup program. See
Chapter 3 for details on how to set processor speed.
You can install from 8 MB to 384 MB of memory in the
motherboard DIMM sockets. The board has DIMM sockets
arranged as banks 0, 1, and 2 (See Figure 29). The
motherboard supports the following memory features:
♦
168-pin 3.3 V DIMMs with gold-plated contacts
♦
66 MHz unbuffered SDRAM
♦
Non-ECC (64-bit) or ECC (72-bit) memory
♦
8 MB, 16 MB, 32 MB, 64 MB, and 128 MB modules
When adding memory, follow these guidelines:
B
A
OM06229