Removing The Main Peripheral Carrier - Mitsubishi Apricot LS Series Owner's Handbook Manual

C h a s s i s a n d C o m p o n e n t s
Installing the main Peripheral Carrier
2/14 LS700 HANDBOOK
Figure 12. Removing the main Peripheral
Carrier
1. Observe the precautions in 'Before You Begin', at the
beginning of this chapter.
2. Place the chassis on its back.
3. Slide the peripheral carrier into the chassis.
4. Insert and tighten the two screws that secure the carrier
to the bottom of the chassis.
5. Place the chassis on its feet.
6. Insert and tighten the two screws that secure the carrier
to the front of the chassis.
7. If needed, install an EMI shield in the bottom carrier.
A