Pci/Ide Peripheral Interface; I/O Features - Mitsubishi Apricot LS Series Owner's Handbook Manual

PCI/IDE Peripheral Interface

I/O Features

8. Use the arrow keys to select Clear Passwords. Press
<Enter> and Setup displays a pop-up screen requesting
that you confirm clearing the password. Select Yes and
press <Enter>. Setup displays the Maintenance menu
again.
9. Press <F10> to save the current values and exit Setup.
10. Turn off the computer.
11. Remove the computer top and access covers.
12. To restore normal operation, place the jumper on pins
1-2 as shown below.
3
1
J8B2
OM06240A
13. Replace the cover and turn on the computer.
The motherboard has a high-speed, 32-bit PCI/IDE
interface that supports the following:
♦
Up to four PCI/IDE hard drives on the PCI bus
♦
PIO Mode 4 and Bus Master IDE
♦
Logical block addressing (LBA) of hard drives larger
than 528 MB
♦
Extended Cylinder Head Sector (ECHS) translation
modes
♦
ATAPI devices (such as CD-ROMs)
The I/O controller integrates the functions for the serial
ports, parallel port, diskette drive, and keyboard. This
component provides:
S y s t e m m o t h e r b o a r d
LS700 HANDBOOK 3/7