Removing The Top Cover - Mitsubishi Apricot LS Series Owner's Handbook Manual

Installing the Top Cover
Figure 4. Removing the Top Cover
1. Observe the precautions in 'Before You Begin', at the
beginning of this chapter.
2. Check that you have not left any tools or loose parts
inside the chassis. Check that everything is properly
installed and tightened.
3. Lay the cover on top of the chassis so the plastic tabs on
the inside of the cover match up with the holes in the
top of the chassis.
4. Slide the cover towards the front of the chassis as far as
it will go.
5. For security, you can install a padlock to prevent future
unauthorised removal of the cover. If you do not install
a padlock, reinstall the plastic plug.
6. Reconnect all cables to the computer.
C h a s s i s a n d C o m p o n e n t s
LS700 HANDBOOK 2/3