Removing The Power Supply - Mitsubishi Apricot LS Series Owner's Handbook Manual

Figure 19. Removing the Power Supply
Installing the Power Supply
WARNING
This procedure should be done only by qualified technical
personnel. Observe the precautions in 'Before You Begin', at the
beginning of this chapter.
1. Place the power supply in the chassis.
2. Insert and tighten the four screws that secure the power
supply to the chassis. (See Figure 19).
3. Connect the power cable to the motherboard.
4. Connect power cables to any peripheral devices.
C h a s s i s a n d C o m p o n e n t s
A
LS700 HANDBOOK 2/25