Mitsubishi Apricot LS Series Owner's Handbook Manual page 12

Figures/Illustrations
1. Front Panel Controls and Indicators
2. Back Panel Connectors and Features
3. Selecting the Input Voltage Setting
4. Removing the Top Cover
5. Removing the Access Side Cover
6. Removing the Non-access Side Cover
7. Removing the Bezel
8. Removing the Expansion Slot Cover Bracket
9. Removing an Expansion Slot Cover
10. Installing an Add-in Card
11. Removing the Carrier
12. Removing the Main Peripheral Carrier
13. Removing the Floppy Diskette Drive
14. Installing a Hard Drive in the Carrier
15. Installing a Hard Drive behind the Power Supply
16. Installing a Hard Drive in the Main Peripheral Carrier
17. Install/remove a Full-width Peripheral Device
18. Removing the Fan/card Guide Module
19. Removing the Power Supply
20. Motherboard Components
21. Back Panel I/O Connectors
22. Location of the Configuration Jumper Block
23. Motherboard Connectors
24. Front panel Connections
25. Removing the Heatsink Support Top Bar and the Processor 4/2
26. Installing the Processor Retention Mechanism
27. Installing the Processor
28. Installing the Heatsink Support Top Bar
29. Location of DIMM Sockets
30. Installing a DIMM
LS700 HANDBOOK
C o n t e n t s
chapter/page
1/2
1/3
1/5
2/3
2/4
2/6
2/7
2/8
2/9
2/11
2/12
2/14
2/15
2/17
2/18
2/20
2/22
2/23
2/25
3/2
3/3
3/4
3/11
3/15
4/4
4/5
4/6
4/7
4/8
CONTENTS/3