Mitsubishi Apricot LS Series Owner's Handbook Manual page 42

C h a s s i s a n d C o m p o n e n t s
Removing the Power Supply
2/24 LS700 HANDBOOK
2. Hook the bent plastic tabs on the module in the holes
in the front of the chassis.
3. Swing the module against the chassis and secure it by
pressing the plastic clips on the module into their slots
in the chassis.
WARNING
This procedure should be done only by qualified technical
personnel. The power supply in this product contains no user-
serviceable parts. Refer servicing only to qualified technical
personnel.
1. Observe the precautions in 'Before You Begin', at the
beginning of this chapter.
2. Label and disconnect power cable from the computer
and all peripheral devices.
3. Label and disconnect the power cable from the
motherboard.
4. Remove the four screws securing the power supply to
the chassis.
5. Lift the power supply out of the chassis.