3.1 Phone User Interface Programming
3.1 Phone User Interface Programming
This section provides information about the features that can be configured directly from the unit, but that
are not mentioned in the Operating Instructions.
3.1.1 Opening/Closing the Web Port
To access the Web user interface, you must open the unit's Web port beforehand.
To open the unit's Web port
1.
In standby mode, tap
2.
Tap "Basic Settings".
3.
Tap
or
to select "Other Option".
4.
Tap "Other Option".
5.
Tap "Embedded Web".
6.
Select "On", and then tap "OK".
To close the unit's Web port
1.
In standby mode, tap
2.
Tap "Basic Settings".
3.
Tap
or
to select "Other Option".
4.
Tap "Other Option".
5.
Tap "Embedded Web".
6.
Select "Off", and then tap "OK".
44
Administrator Guide
or
to select "Basic Settings".
or
to select "Basic Settings".
Document Version 2016-05