Table of Contents
Advertisement
INSTALLATION & SETUP
S-Video
'
The video decoder input panel provides simultaneous connection of both a composite
INPUT 3
INPUT 4
video source (
) and an S-Video source (
).
If connecting an S-Video source, use the 4-pin mini DIN connector or the Y and C
INPUT 4–
BNC connectors (luma and chroma) at
do not use both as inputs. See Figure
2.16.
Figure 2.16. Connecting S-Video
NOTE: If you want to loop an S-video signal through to another projector or display
device, see Video Loop Through below.
2-15
DLV1280 DX User's Manual
Advertisement
Table of Contents
