Table of Contents
Advertisement
OPERATION
CHANNEL EDIT — STEP 3
3-20
DLV1280 DX User's Manual
Figure 3.11. Channel Edit Menu (
If desired, edit the following channel setups in the Channel Edit menu:
•
CHANNEL NAME:
here. Channel names can be up to 12 characters in length.
•
CHANNEL NUMBER:
here. NOTE: If you enter a channel number that already exists, a dialog
message appears indicating that this number is already in use–assign a
different channel number.
•
SWITCHER NUMBER: "
source is connected to a switcher, the default will be the lowest switcher
number available (from 1-9)–change here as desired.
•
SLOT:
1 (
Input1
current slot number (1-9) if the source is connected to a switcher.
•
LOCKED:
If checked, all of the image settings for this channel are disabled.
If unchecked (default), all available image settings can be adjusted as
desired. You cannot use Auto Setup with a locked channel.
•
IN MENU:
If checked (default, except for automatically defined channels
with unchanged parameters), this defined channel will then appear in the
list available when
accessed via
On-screen display of the channel list is an option that must be set in the
Menu Preferences menu.
•
AUTO SOURCE:
locate this channel when an incoming input signal matches. If not
checked, the projector can locate the selected channel only when it is
directly selected via
not result in a channel change.
•
PREVIOUS CHANNEL:
settings for the previous channel in the Channel Setup list.
•
NEXT CHANNEL:
for the next channel in the Channel Setup list.
An alpha-numeric label can be defined and/or changed
A channel number from 01 to 99 can be changed
0" represents the projector itself. Or, if the input
), 2 (
Input2
), 3 (
Input3
), or 4 (
Chan
key is pressed. If unchecked, the channel must be
Chan
on the keypad or via the Auto Source function. NOTE:
If checked, (default), the projector can automatically
Chan
on the keypad—and a change in input signal will
Select this option to see or change Channel Edit
Select this option to see or change Channel Edit settings
)
SAMPLE
Input4
) for projector inputs, or
Advertisement
Table of Contents
