Table of Contents
Advertisement
Enter
Enter
Press
Enter
to select a highlighted item, to toggle a checkbox (checked vs. unchecked),
or to accept a parameter adjustment and return to the previous menu or image.
Exit
Exit
Press
Exit
to return to the previous level, such as the previous menu.
NOTE:
Exit
does not save changes within text editing boxes (including number
editing of a slidebars) or within pull-down lists. It acts as a "cancel" in these cases.
Arrow Keys
The arrow keys have a variety of functions depending on the situation. Some typical
uses are described below. See also Editing Text later in Section 3.
•
Use
or
adjustment (note the adjustment increments and range depend on the
parameter being adjusted).
•
Use
or
without having to display the list first
•
Use
or
down lists.
ON
Use the
ON
or
or
increase or decrease the value in the second (bottom) slidebar of a double slidebar.
OFF
You can also use
including an asterisk symbol—to ensure a toggle only in the desired direction. When
turning the projector on, for instance, you may be too far from the projector to know
whether it is really off or if the shutter is merely closed. If you press
for approximately 1 second in hopes of turning the projector on, the projector will
actually turn off if the projector was already on. Instead, to avoid the risk of toggling
in the wrong direction, quickly press and release normally the function key you wish
to toggle (in this case
or
OFF
as desired. The specific toggle will occur.
Toggle keys are labeled with an asterisk on the keypad. They are listed below:
•
Shutter*
Shutter*
•
Stby*
Stby*
•
Power*
Power*
•
Mute*
Mute*
•
OSD*
OSD*
Color
Color
Press
Color
to adjust the color saturation level, i.e. the amount of color in a video
image. Lower settings produce less saturated colors — a setting of "0" produces a
to change a slidebar value—hold as desired for continuous
to change to a different option within a pull-down list
to jump between "pages", such as in Help or lengthy pull-
OFF
keys to navigate within a menu, pull-down list or text box, or to
ON
or
OFF
in conjunction with certain toggle keys—i.e., those
Power*
). Then immediately (within 2 seconds) press either
+
ON
= close the shutter
+
OFF
= open the shutter
+
ON
= put the projector in standby mode
+
OFF
= leave standby
+
ON
= turn the projector on
OFF
+
= turn the projector off
+
ON
= turn the menu display on
+
OFF
= turn the menu display off
ON
+
= turn the menu system on
+
OFF
= turn the menu system off
(OPTIONAL IN THIS MODEL)
(OPTIONAL IN THIS MODEL)
DLV1280 DX User's Manual
OPERATION
Power*
and hold it
ON
3-7
Advertisement
Table of Contents
