Christie DLV1280 DX User Manual page 45

OPERATION
Time-outs
The Global Icon
Using Slidebars and
Other Controls
3-12
DLV1280 DX User's Manual
At the bottom of some menus, a line of hint text also appears.
'
Whenever the projector has left presentation level, such as when there is a slidebar,
menu, message or test pattern displayed, you have limited time in which to make a
keypad entry before the projector returns to presentation level and the graphic
disappears. These time-outs vary depending on the current display, as shown in the
following chart:
'
In the menu system, settings that include this icon apply universally to any incoming
signal.
'
Most of the function menus allow you to change settings by using slidebars,
checkboxes, and pull-down lists. To select a slidebar, toggle a checkbox status, or
view a pull-down list, do one of the following within the function menu:
•
Enter the menu option number corresponding to the setting you wish to
change (for example, press
menu).
•
Or move the highlight to the desired parameter and press
•
Or move the highlight to the option desired and press
•
Or bypass the menus entirely and use a single key to immediately access an
adjustment during your presentation (note: applies only to options having their
own key, such as Color, Tint, Detail, Contrast, Brightness, Volume, Pixel and
Position).
Once selected, change the setting as desired (see below) and press
return to the current function menu.
Slidebars in menus -
such as size or vertical stretch, appears to the left of its slidebar
icon (window). This number often expresses a percentage, or it may have units
associated with it (such as pixels, degrees Kelvin, etc.), depending on the specific
option. Press or
number and the length of the bar change accordingly (for continuous adjustment,
Figure 3.5. Accessing General Help Topics
TIME-OUTS
Slidebar (from pres.)
Slidebar (from menu)
Lamp Timer Msg.
Channel entry
Other
to select Vertical Stretch in the Size & Position
The current value for a given parameter,
to gradually adjust the setting up or down—both the
5 seconds
15 minutes
30 seconds
5 seconds
15 minutes
Enter .
or
Enter
.
to save and