Christie DLV1280 DX User Manual page 52

Editing a Channel Setup
CHANNEL EDIT — STEP 1
CHANNEL EDIT — STEP 2
TO DELETE A CHANNEL
then press Func to activate the Channel Copy/Delete submenu. Select "Delete" and
press Enter —a confirmation window will appear to make sure that you really want to
delete this channel.
TO DELETE MULTIPLE CHANNELS
and press Func to go to the Channel Copy/Delete submenu. Select "Delete Unlocked
Only" and press Enter
to delete all channels, even those that are locked. In either case, the current channel
will remain but will be redefined from projector defaults.
NOTE: For any deletion, a confirmation box appears to make sure that you really
want to delete. Select "Cancel" (default) if you don't want to delete after all.
'
The basic setups that describe how and where a channel can be accessed are listed in
the Channel Setup menu. These channel setups can be edited at any time in the
Channel Edit submenu.
From the presentation level press
Channel Setup menu, press
and press Enter . The Channel Setup menu will appear.
To edit parameters shown in the Channel Setup menu, select the relevant channel and press
Enter
. The Channel Edit menu will appear similar to the sample shown in Figure 3.11.
Figure 3.9. Copying A Channel
, highlight the desired channel in the Channel Setup menu,
Figure 3.10. Deleting a Channel
, highlight any channel in the Channel Setup menu
to delete all unlocked channels. Or select "Delete All Channels"
Menu to display the main menu. To display the
, or move the highlight to the Channel Setup option
OPERATION
DLV1280 DX User's Manual
3-19