Christie DLV1280 DX User Manual page 83

OPERATION
3-50
DLV1280 DX User's Manual
• For each projector, select "Tiled Full Width"
to fill the videowall from left-to-right while
maintaining aspect ratio. This typically
creates a top and bottom black border on the
wall, and is best suited for HDTV signals. See
right.
NOTE FOR LARGE ARRAYS: 1) In large
arrays having 3 or 4 rows, the center row(s)
will automatically fill. 2) Screens with very
little or no image will be blanked (cropped).
• For each projector, select "Tiled Full Height"
to fill the videowall from top-to-bottom while
maintaining the incoming aspect ratio. This
typically creates a black border on the left and
right edges of the wall. See right.
NOTE FOR LARGE ARRAYS: 1) In large
arrays having 3 or 4 columns/rows, the center
screen(s) will automatically fill. 2) Screens
having very little or no image will be blanked
(cropped).
• For each projector, select "Tiled Anamorphic"
to fill the videowall from left-to-right while
maintaining the incoming "widescreen"
(anamorphic) aspect ratio of 16:9. This
typically creates a black border at the top and
bottom edges of the wall. See right.
NOTE FOR LARGE ARRAYS: 1) In large
arrays having 3 or 4 columns/rows, the center
screen(s) will automatically fill. 2) Screens
having very little or no image will be blanked
(cropped).
Large Displays and 10-bit Processing
When processing sources through
the optional ADP module, you
may have to crop the extreme top
and bottom edges of the image
OR map to fewer screens (see
right).