Table of Contents
Advertisement
DVI Input Module
38-804635-xx
Marquee
Case/Power Supply
38-801023-xx
38-801026-xx
'
The DVI Input Module can be installed in the projector to display digital video input
signals conforming to the DVI (Digital Visual Interface) standard (single-channel).
Features
◊ Supports Digital Visual Interface (DVI) single-channel
◊ Supports VESA Extended Display Identification Data (EDID)
◊ Provides an active-loop-through using a DVI connector (conforming to the
DVI Specification)
'
The Marquee Case/Power Supply enables you to use an analog input module as a
stand-alone interface. Two supplies are available: one for use with 120 volt line
voltage (38-801023-XX), and the other for use with 220 volt line voltage
(38-801026-XX). Both models include a 15 Vdc, 500 mA AC adapter.
Marquee Case/Power Supply Features
◊
easy installation — no tools required
◊
the Marquee Case/Power Supply accepts the following input modules for
use with this projector: RBG500, RGB400 Active Loop-Thru, RGB400
Buffered Amplifier, Composite/S-Video, and PC Analog. Digital inputs
cannot be used.
◊
retaining clip to secure AC adapter
◊
non-slip feet
◊
supplied with 110 or 220 volt AC adapter
OPTIONAL INPUT MODULES
DLV1280 DX User's Manual
F-5
Advertisement
Table of Contents
