Christie DLV1280 DX User Manual page 12

INSTALLATION & SETUP
Figure 2.9. Adjusting Lens Mount to Offset the Image
The maximum vertical adjustment of ±70 pixels means that up to 57% of the image
can be projected above or below the lens center.
The maximum horizontal adjustment of ±50 pixels means that up to 54% of the
image can be projected to one side of the lens center.
Keep in mind that precise offset ranges depend on the specific lens you are using,
where the true lens center is located without offset, and whether or not you are
offsetting both horizontally as well as vertically. See Table 2.1 and Figure 2.10.
2-9
DLV1280 DX User's Manual