Christie DLV1280 DX User Manual page 136

Composite / S-Video
Input Module
38-804608-xx
PC250 Analog
Input Module
38-804609-xx
'
The Composite/S-Video Input Module may be installed in this projector, a Marquee
Signal Switcher or a Marquee Case/Power Supply. The module receives either
composite video or S-video input signals from tape or disk players (do not connect
both types of signals simultaneously). Video inputs are 75
outputs are provided for buffered loop-through to another display device.
Composite/S-video Features
◊
BNC connectors for composite RGB signals
◊
4-pin mini-DIN connectors for S-Video signals
◊
buffered loop-through video outputs
NOTES: 1) This interface is not a decoder. NTSC, PAL, or SECAM signals must
connect to the video decoder installed at
are not functional. 3) For use with this projector, do not connect both composite
video and S-video signals to the Composite / S-Video Input Module–connect one or
the other, even when plugged into a switcher.
'
The PC250 Analog Input Module may be installed in this projector, a Marquee
Signal Switcher or a Marquee Case/Power Supply. The module receives analog RGB
input signals from IBM PC compatibles or Macintosh computers. Video inputs are
S
75 terminated. Video outputs are provided for buffered loop-through to another
display device.
PC250 Analog Features
◊
accepts VGA or MAC RGB video
◊
15 pin D connectors for video
◊
active loop-through video outputs
NOTES: 1) This interface does not accept VGA and MAC signals simultaneously. 2)
The audio connectors are not functional. 3) Trademarks are the rights of their
respective owners.
OPTIONAL INPUT MODULES
S
terminated. Video
INPUT 3 INPUT 4
/ . 2) The audio connectors
DLV1280 DX User's Manual
F-3